How to bleach darkened fur yourself, video instructions

All fur products require proper care and special attention. Owners of fur coats often have questions about how to bleach their fur. Due to constant use or long-term storage, such products lose their original aesthetic appearance and beauty and turn yellow.

You can carry out bleaching procedures at home, without resorting to the services of professional dry cleaners, so the question of how to bleach fur at home is relevant.

All fur products require proper care and special attention.

Causes of yellowing

When purchasing products made from natural fur, you must take into account the fact that over time it will definitely begin to acquire a yellowish tint. This happens because the natural color pigment of the villi fades under the influence of ultraviolet radiation. The same effect happens to people's hair in the summer. Also, the fibers can burn out from the bright light of the lamps. If the finished product has been hanging for a long time in a store with daylight, or at home on a hanger in a brightly lit room, then this process is inevitable.

Boa with yellowed fur

But even if you carefully pack your mink collar coat or white rabbit fur coat and hide it deep in the closet, it will simply prolong its original appearance a little.

How can you wash faux fur without damaging the product?

How to bleach faux fur if dry cleaning does not bring the desired result? Almost all products made from synthetic materials can be wet processed. The main thing is to do everything correctly and as carefully as possible.

Almost all products made from synthetic materials can be wet processed

In order to get rid of various dirt, stains and bleach faux fur, you will need the following cleaning tools and products:

a small but roomy basin or bowl;
shower gel or shampoo (it is not recommended to use liquid washing powder, as it has an aggressive effect on fur products);
soft sponge or soft brush;
paper napkins or towels;
light terry towel.

The wet washing process will consist of several stages. First of all, it is necessary to place the fur product in such a way as to provide access to all places and smooth out folds. For convenience, you can hang the item on hangers. In a small basin with lukewarm water, you need to dilute a small amount of gel or shampoo. Shake the mixture until you get a lot of soap foam. Using a soft sponge or brush, treat the entire surface of the product, trying to work exclusively with foam, using a minimum amount of water.

Upon completion of the procedure, use dry wipes or paper towels to remove excess moisture from the surface of the fur. You can also use a terry towel, which can absorb the maximum amount of moisture. Next, gently smooth the pile with your hands in the desired direction and leave to dry in a warm room, avoiding proximity to heating devices and radiators. An important point is that you can comb the artificial pile only when it is completely dry. A regular comb with blunt teeth or a special brush will do for this.

On a note! By correctly performing all the steps, you can whiten and refresh the fur, as well as get rid of contaminants such as various stains and dust.

Purification process

Considering the degree of yellowing, you can improve the appearance of the fur product at home.

Attention! Choose the method that suits you best and test it on a small area of fur on the least visible side.
Cleaning a mouton coat

Once you are convinced of its feasibility, you can begin bleaching the entire product.

Cleaning from dirt and dust: sprinkle the fur fibers with any natural adsorbent. This could be starch, flour or white chalk. Rub carefully with your hands so that the adsorbent absorbs all the dust and dirt. If the yellowing is not associated with a change in pigment, then this method will help restore the purity of even mink fur.
Fur that is very yellowed from dirt can be bleached using animal shampoo. Pour it into a spray bottle and dilute it slightly with water to remove the thickness. Then sprinkle potato starch on your collar or fur coat and spray the resulting detergent onto the lint. Gently spread with your hand evenly over the entire area. Let dry.

Note! After both of the above methods, you need to shake the product thoroughly and then clean it with a clothes brush.

What methods exist for bleaching fur products at home?

Cleaning white fur items can be done at home using various and most unusual products.

Small sawdust from trees with the addition of purified gasoline has an excellent whitening effect.

The main options that will help deal with stains on things and whiten white fur are the following:

Small sawdust from trees with the addition of purified gasoline has an excellent whitening effect. At the same time, special sawdust can be purchased at any pet store (when purchasing, pay attention to the fact that the product should not contain resin), and gasoline can be found on supermarket shelves in the household chemicals department. To clean the product, just mix these two components and scatter them on the surface of the fur and rub gently. At the end of the procedure, the fur is combed and the remaining sawdust is shaken out.
You can use an alcohol solution with the addition of baking soda. To prepare the cleanser, mix the components in a ratio of three to one and treat the fur surface with a soft sponge.
If you have pets at home, you can borrow some shampoo from them and carry out the procedure for bleaching the fur product. A weak soap solution is made from this shampoo, applied to white fur and wiped with a dry cloth or paper towel.
As a bleaching agent, you can use regular cereal - semolina. It is necessary to treat fur products with it, laying things out on a hard and flat surface. Such dry cleaning will easily cope with settled dust and yellowing. Upon completion of the procedure, it is necessary to shake out the remaining cereal from the outer clothing.

In order to bleach yellowed natural fur, you can use one of the methods described above or try a method such as dry cleaning services.

As a bleaching agent, you can use regular cereal - semolina.

How to bleach yellowed fur with peroxide

The use of hydrogen peroxide or ammonia is understandable. Peroxide has wonderful whitening properties. It is often used at home to whiten any yellowed items. Important! Keep in mind that it is very caustic, and if your gray or blue mink fur has turned yellow, then be extremely careful. Since the natural pigment can become significantly lighter.

Hydrogen peroxide 3%

To bleach yellowed fur, you will need:

hydrogen peroxide solution;
a new sponge or cotton swab;
ammonia.

Ammonia

Dilute 1 teaspoon of peroxide in 150-200 ml of water, add a few drops of ammonia. Dampen a foam sponge and gently rub over the yellowed fibers. It is important not to touch or saturate the skin itself, but only the pile. You can occasionally treat white rabbit fur with this solution for prevention, just make it less concentrated.

How to bleach Arctic fox fur - 10 proven methods

3 Summary

I have a snow-white fur coat that is starting to take on a dirty tint. I'm not a fan of yellowed fur, so I immediately started looking for how to bleach it. I hasten to share the knowledge I have gained with you.

It is not at all necessary to take a fur item to the dry cleaner; available means will help bleach the fur. Causes of yellowing of fur

Before you figure out what to do and what to do with yellowed fur, I propose to consider the main reasons for damage to the product:

Photo Description Cause 1. High humidity .

If you get caught in the rain, there is a high risk that it will cause a yellowish tint to the fur.

If fur is growing on your fur coat, then you can blame it on excess moisture. Reason 2. Improper storage .

During the off-season, due to improper storage, a large amount of dust gets onto the fur product.

Its accumulation can lead to a change in shade. It is best to store such items in a special blue case or bag. Reason 3. Secretion of sweat glands .

Sebum is well absorbed into the villi of the product, affecting its quality. Methods for cleaning fur: 10 options Fur may turn yellow due to moisture, improper storage or sebum

Saving arctic fox fur from yellowing without expensive cleaning products is a real task. The cleaning method must be chosen depending on whether it is natural or artificial.

Cleaning natural fur: 7 recipes

It is not at all necessary to go to the dry cleaner if the fur has turned yellow. The price for such services increases every year, but the quality leaves much to be desired.

Useful means that can be found in almost every home will help you bleach natural pile:

Image Instructions for action Method 1. Wet cloth

Washing white fur is not a good idea. But without water procedures it will be difficult to remove dust:

Wet a piece of white, clean cloth and wring it out thoroughly.
Wrap the product with it.
Walk over its entire surface with finger movements. The damp cloth will absorb all the dust and refresh the appearance of your fur coat.

Method 2. Potato starch

Sprinkle the surface of the product with potato starch.
Dilute a small amount of delicate washing powder in warm water. Pour the liquid into a spray bottle.
Spray the product with the resulting composition.
Wait for it to dry.
Use a clothes brush to comb out any remaining starch and powder.
Short fur should be brushed against the growth of the pile, and long fur should be brushed in the direction of growth.

Method 3. Sawdust and alcohol

The following recipe will help to bleach the fur of the Arctic fox in places where it comes into contact with the skin.

Soak sawdust from deciduous trees in alcohol and scatter over the surface of the fur coat.
Rub them lightly with your hands, then add a new portion.
Remove sawdust with a comb.
It is very important to take sawdust from deciduous trees; sawdust from coniferous trees may contain resins, which can cause the pile to simply stick together.

Method 4. Vinegar

9% vinegar will help bleach fur at home:

Place the product on a horizontal surface.
Soak a clean piece of white cloth in alcohol.
Wipe the lint with it.
Hang your fur coat on the balcony for airing.

Method 5. Hydrogen peroxide and talc

Using hydrogen peroxide, you can deal with even the most outdated yellow spots:

Mix peroxide with body talcum powder until a paste forms.
Apply the mixture to the surface of the item.
Wait for the mixture to dry, then shake the product.
Go over the pile with a dry, clean brush.

Method 6. Hydrogen peroxide and ammonia

You can also bleach villi using a combination of ammonia and hydrogen peroxide:

In a glass of water, dilute a teaspoon of peroxide and alcohol.
Soak a sponge in the solution, wring it out and walk over the fur.
Hang the item to dry in the sun. Sunlight will only enhance the whitening properties of peroxide.

Method 7. Chalk powder

Grind the chalk well into powder.
Apply it to your fur coat or hat.
Rub the powder into the lint with your hands.
Shake the product and, if necessary, treat it with a dry brush.

Cleaning faux fur: 3 ways

Faux fur is less easy to clean than natural fur, but that doesn't mean you shouldn't even try:

Image Instructions Method 1. Lemon juice

Dilute lemon juice in a liter of water.
Soak a clothes brush in the resulting solution.
Walk it along the path of the pile.
Hang the product on a hanger and let it dry.
Comb the fur coat with a comb.

Method 2. Glycerin

Glycerin will help whiten yellowed fur:

Mix it with water in equal proportions.
Apply the resulting composition to the surface of the product.
Wait for it to dry and comb it. Glycerin will not only lighten the fur, but also make it softer.

Method 3: Liquid detergent

Faux fur can be washed with your own hands or in a washing machine using the “hand wash” mode. The water temperature should be no higher than 30 degrees, and only liquid detergents can be used in the process.

Bottom line

You learned that you can bleach natural and artificial arctic fox fur with your own hands. This will allow you to preserve the beautiful appearance of your favorite things for a long time. Even more useful tips are in the video in this article. And if you still have questions or want to share your own cleaning recipe, write in the comments.

Source

Useful tips

If you see that the fur has turned yellow and you don’t know how to bleach it, then first weigh the pros and cons. Read reviews from other people about using a particular method. Choose the whitening method that suits you best. Be sure to test it on an inconspicuous area of the product.

When you have a blue mink collar or sheepskin coat, use the optical action method. Dilute the blue in warm water and use a spray bottle to apply the solution to the fur. Let dry thoroughly. This tinting will hide traces of yellowing and add freshness and brightness to the color.

Try to clean and bleach contaminated outerwear in a timely manner. After the end of the cold season, immediately before putting it in the closet, carefully check the condition of the fur.

Leave your comment:

How can you clean products made from arctic fox and silver fox fur?

Products made from arctic fox fur have always been signs of luxury and beauty. The item is soft to the touch and brings warmth and comfort. Unfortunately, even the most careful care will not be able to protect the owner of an arctic fox coat from yellowing of the fur.

A mixture of ammonia and hydrogen peroxide will help get rid of temporary yellowing and restore the whiteness of arctic fox fur.

How can you bleach Arctic fox fur? There are several proven methods listed below:

Potato starch has the ability to bleach various fabrics and fur products. It, like a sorbent, absorbs dirt and allows you to return the original whiteness of the item. In order to clean a product made from arctic fox fur, it is necessary to treat its entire surface with potato starch, and then carefully rub this component into the pile. Upon completion of the procedure, shake off the remaining starch from the fur and carefully comb the fur coat with a soft brush.
A mixture of ammonia and hydrogen peroxide will help get rid of temporary yellowing and restore the whiteness of arctic fox fur. The cleaner can be prepared by mixing a glass of warm water with a teaspoon of peroxide and a few drops of alcohol. Spray the bleach solution onto the pile of the product and hang the product in such a way that it receives direct sunlight.

To restore the shine and shine of a fur coat, you can treat it with a napkin soaked in a weak vinegar solution.

The cleaner can be prepared by mixing a glass of warm water with a teaspoon of peroxide and a few drops of alcohol

In addition, you can find a wide variety of cleaning products on supermarket shelves.

How to clean faux white fur

As you know, faux white fur cannot be washed. It can be cleaned with shampoo foam. To do this, you need to beat the shampoo in hot water until foam forms. Using a brush, apply foam to the fur item. This must be done in the direction of the villi. After this, remove the foam with a damp cotton material. Next, wipe the product dry with a terry towel. After the item has dried, it will need to be combed.

You can learn more about washing fur in another article on our website: How to wash fur.

Thus, you can clean white fur from various types of contaminants using hydrogen peroxide, talc, and medical alcohol. The most important thing is to keep the product clean and tidy, and it will serve you for many years.

How to Clean White Fur with Rubbing Alcohol

Rubbing alcohol is also widely used to clean fur products. To clean white fur with this liquid, you will need to purchase the following accessories:

medical alcohol;
baking soda;
foam sponge;
a special brush for wool.

Prepare a solution of baking soda and rubbing alcohol. To do this, take a glass of warm water, add soda and alcohol in a ratio of 3:1. We wet a sponge or brush in this solution and carefully clean the fur from dirty spots. It is necessary to clean fur products from various types of contaminants in the direction of hair growth.

If there are greasy stains on a fur product, then talc is used. It needs to be rubbed into the fur and combed out with a brush. The procedure can be repeated if necessary.

Cleaning faux fur items

Unlike natural fur, faux fur is tougher. To clean it, you can use regular washing powder. To prepare the solution, mix one liter of warm water with two tablespoons of powder. Apply the resulting mixture to the product and blot with a napkin. When the item is dry, you can start combing the pile.

There is also another way to get rid of yellow spots on faux fur. Mix technical alcohol, a glass of water and a drop of glycerin. Apply the resulting solution to the pile, wait until the product dries and brush it with a brush. When using this method, please note that it is not suitable for painted items.

Why does the fur turn yellow?

Any fur product needs timely care and careful handling. Yellowed spots on fur items can appear for several reasons:

Exposure to moisture. Snow and rain have an adverse effect on fur. As a result, it begins to turn yellow and looks old.
Dust accumulation. The lack of wet cleaning and regular ventilation of the room leads to the fact that dust begins to accumulate on clothes, as a result of which the product darkens and turns yellow.
Sweating. During wear, a secretion from the sweat glands remains on the clothing, which is quickly absorbed by the fur, making it yellow and unattractive.

If the fur coat has lost its original appearance, yellow spots have appeared on the fur - do not despair. There are many proven methods that will help you solve this problem quickly and without much material cost.

Properly care for fur

Over time, fur can lose its luster and become matted . To restore it to its original appearance, use a linen cloth moistened in vinegar essence at home. Wipe the tops of the fur with it, without touching the inside.

The glossy sheen of the pile can be restored with vinegar, but the acid makes the pile hard, so it cannot be used often. Photo: c.radikal.ru

Coarse and hard fur (nutria, bear, goat, wolf) can be cleaned with bran . First, clothes are sprinkled generously with them, then dry cleaning is done.
To clean muskrat and otter fur, you can use sand . It should be separated from impurities and heated until completely dry. Then the item is placed on a flat surface, sand is scattered on it, and the dry washing method is used. Constantly remove contaminated absorbent and add new one. Repeat the operation until the sand and palms are clean.

Sand perfectly cleans the skins of waterfowl. Photo: betonspb.com

If the fur core (leather base) has become rough:

stir 1 tbsp in four glasses of heated water. l. glycerin, 1/2 tsp. lemon juice and 1 yolk;
wipe the composition on the inside of the clothes;
knead and stretch the skin a little;
then remove the rest of the solution and lay out the clothes to dry - they should be placed inside out.

Glycerin and egg yolk will restore softness and elasticity to the flesh. Photo: vashamaska.ru Never try to use a washing machine when cleaning a fur coat.