Fur comes out of the sheepskin coat (Tuscan lamb)! I bought a sheepskin coat 6 months ago in installments for half a year, and almost paid it off.


How to try on a sheepskin coat correctly

If the sheepskin coat meets all the criteria during inspection, you should proceed to the next stage - fitting. The most important and mandatory criterion is comfort. The thing should not press, fetter or, on the contrary, be too free. Decorative elements should not interfere or “pull” the sleeves. A sheepskin coat of the correct cut and appropriate size will not swing open when walking.

One of the undeniable methods for checking compliance with cutting technology is raising one hand. In the positive case, the area on the opposite side should remain in place and not “move out”. Also, active movements should not affect the position of the shelf and back of the product. Any distortions most likely indicate poor quality of the pattern and tailoring.

When talking about the size of outerwear, you should consider what you plan to wear underneath it. Even fashionable fitted options should be designed for a warm sweater or cardigan underneath. You should not give in to the seller’s persuasion about the item’s exceptional frost resistance; it is better to leave yourself the opportunity for additional insulation.

Having put on a sheepskin coat, you need to move and walk around in it and listen to see if sounds arise when the sleeves and other areas rub against each other. This is especially important for leather-look products. A characteristic cracking sound indicates the rigidity of the material. It may be a consequence of high humidity in the place where clothes are stored or transported. In addition, the quality of the leather may not be adequate to begin with. Whatever the reason, it is better to refuse to buy such an item.

The pile should be uniform over the entire surface

Why does a natural fur coat give an electric shock?

The answer to this question is very simple and comes straight out of a school physics course. Any fur coat, be it mouton or mink, looks like human hair. When the fibers rub against each other, static electricity accumulates. This can happen while wearing it or when transporting it from place to place. Then, when you touch it, electricity comes out in the form of a charge, that is, the fur coat gives an electric shock.

It is impossible to predict when this will happen and with what force. Also, this phenomenon does not indicate a defect or fake. This is a natural phenomenon. However, it is necessary to pay attention to what needs to be done to reduce the amount of current.

How to choose a sheepskin coat made of genuine leather?

Today, the modern assortment of sheepskin coats offers a wide variety not only in terms of appearance, but also in terms of quality . In the old Soviet times, no one doubted the quality of this type of clothing, since it was manufactured under strict control and subject to compliance with government standards. Today the situation has changed and representatives of the fairer sex need to have certain knowledge in order to choose a high-quality sheepskin coat and subsequently not be disappointed in the purchase.

In order not to be disappointed in the quality of this type of clothing, it is worth studying the advice of experts. Here's what they say:

  1. Fur velor (the outer side of the product) should be soft to the touch and have a uniform pile.
  2. The outer surface of the product must have a graphic writing property, that is, it must retain a clear trace when touched by a finger.
  3. Before purchasing, you should carefully inspect the front surface of the sheepskin coat for scratches, grease and salt stains, paint stains, and glue stains. If they are found, the product is not worth purchasing.
  4. If the coating of the product has a water-repellent treatment, then the surface should not be rough or sticky to the touch. You can check how the coating of a sheepskin coat behaves from contact with water by moistening any area of ​​the coating with water.
  5. The edges of the product and all its corners must be flawlessly processed, the seams must be stitched with two lines.
  6. Low quality sheepskin coats will be indicated by gaps in the seams, crooked stitches, folds, and lint catches.
  7. A good coating after compression is easily and instantly leveled. Therefore, it is worth crushing the product before purchasing.
  8. The sheepskin coat should not have an unpleasant odor. This will be evidence of low-quality raw materials, poor dye or unnatural leather.
  9. If lightly pinching the lint leaves a lot of lint in your hands, you should refuse the purchase, as the lady will be disappointed in the quality of the fur in the near future.

How to choose a warm sheepskin coat for the winter?

Most often, young fashionistas, when buying a sheepskin coat, look only at its cut, completely ignoring the thermal insulation properties of this outerwear option . In our country today, foreign models are very popular due to their extraordinary design, color, light weight and comfort to wear.

Sheepskin coats made by Russian craftsmen are denser and heavier, and in appearance they are often inferior to foreign versions. This is due to the use of old patterns and imperfect technologies. Domestic technologies, unlike foreign ones, ignore European rules for processing raw materials to increase the pliability of leather.

Therefore, if you need a warm sheepskin coat, you need to look at the length and thickness of its fur, and the uniformity of the haircut. The best quality is demonstrated by Turkish-made sheepskin coats made from sheep skin. It is this fur that can effectively heat at fairly low temperatures and provide high wear resistance. The only drawback of sheepskin coats is the extra weight.

Popular today are sheepskin coats made from Tuscan lamb skins. In terms of price, they will be more expensive than domestic products, but their high cost is justified by their beautiful design, thick fur and excellent heat-saving properties. The negative side of Tuscany is the need to constantly comb the fur (this must be done so that it does not mat).

Large selection of women's sheepskin coats from Tuscany

Today, Tuscan products serve as a symbol of impeccable taste and wealth, and therefore are shrouded in many rumors and misconceptions. Let's figure out what Tuscany really is!

Firstly, it is the fur of sheep raised in the fertile expanse of Southern Europe, caressed by the hot Mediterranean sun and intoxicated by the crystal waters of icy rivers. Secondly, exclusively young animals are selected for the production of sheepskin coats from Tuscany. Lambs spend their entire lives on endless meadows overgrown with lush herbs. Here, in the very heart of Spain, that unique texture of surprisingly warm and soft Tuscan fur is born. Thirdly, fur used for the production of outerwear is in no case subject to additional processing. Shearing, plucking, burning - Tuscan fur does not require any special preparation to give the product volume and uniformity. Tuscany is beautiful in itself! Fur in its original form is used to sew Tuscan lamb sheepskin coats. Fur given to us by the generous nature of the Spanish expanses. Fur, which in the experienced hands of a furrier turns into a refined and elegant outfit, into a vestment worthy of a true queen!

How to choose a sheepskin coat from Tuscany - tips and tricks

When choosing a sheepskin coat from Tuscany in an online store or deciding to buy a women's sheepskin coat made from Tuscany fur in Moscow in one of the many salons, remember that the fur decorating the cuffs and collar, hood and front placket must have the same structure and density. There can be no question of any defects or roughness of the skin - after all, you came, without exaggeration, for a work of art, you came to buy a sheepskin coat from Tuscany! Does the sheepskin coat “rattle”? Fur as if thinned out? Rest assured, this is not Tuscany, but a fake, made from goat fur, for example, in Turkey. Such a sheepskin coat can also attract admiring glances, have a fashionable and current cut, but, alas, it cannot warm you up in the Siberian winter.

Of course, we should not forget that the cost of Tuscan fur is not comparable to the prices of ordinary sheepskin, wool and jewelry. It fully corresponds to its characteristics, which will more than justify it with the onset of the first cold weather. However, in no case should you overpay. Our online store offers a wide selection of Tuscan products at reasonable prices: short sheepskin coats that will be the ideal addition to a lady's wardrobe, and long models that go perfectly with both trousers and skirts.

Quality criteria

Exterior finishing

There should be no traces of glue, fat or salt on the outside of the sheepskin coat.

The presence of creases or scratches indicates the low quality of the materials used to sew this product.

High-quality material should quickly restore its original shape. If you crease the edge of a sheepskin coat and no creases remain, and all dents quickly return to their original appearance, then you have a good quality material.

You can safely buy such a thing.

Water-repellent properties of the material

If the suede or leather is of high quality, then if you drop a drop of water on it, you will see how it rolls off the surface, but at the same time a light mark remains.

A seller who is confident in the quality of his product will definitely allow such an experiment.

Quality of material coloring

The color of the sheepskin coat must be uniform over the entire surface of the product.

There should be no extraneous inclusions of color, stains or any other defects anywhere.

The quality of the paint can be checked by briefly placing a damp cloth on the surface. If traces of paint remain on it, then you have a sheepskin coat of poor quality - it will become unusable after the first rainfall on the street.

This item is not worth purchasing.

Tailoring quality

Pay attention to the seams of the product.

They must have smooth, defect-free edges. High quality sheepskin coats have double stitching, but they should not be rough.

It will be great if the leather or suede on the cut material is the same color as the fur.

Texture

If you run your palm over the surface of a quality item, you will feel that it is soft, smooth, even and pleasant to the touch.

Quality of fittings

Fittings play an important role in a good product.

All zippers, fasteners and buttons must be strong and securely sewn.

Flaps on pockets and loops must be smooth and durable.

Does the type of fur coat affect how it is electrified?

Some believe that mink or mouton products are more susceptible to electricity accumulation. Sometimes people pay attention to its length or style in this matter. However, in reality, the type of fur does not affect the conductivity of the product. They are all the same because they are all natural animal fur. Therefore, the answer to the question of why a mink coat gives an electric shock is exactly the same as for a mouton coat. It's all about static electricity. However, there are ways that can fix the problem.

Criterion No. 1. Quality document

First of all, decide for yourself where you will buy your sheepskin coat. It is clear that in the clothing market it is cheaper than in a fur goods showroom. However, in the first case, sellers are unlikely to be able to provide a quality certificate at your request. And it is necessary! You don’t want your expensive item to lose its original appearance after the first wash and drying? Some buyers don't even think to ask for this document. Oh, in vain! Having studied it carefully, you can judge how to wear this item without losing quality. The certificate states where the product was made (factory, country of origin), that it has passed the test and will not lose its external data when there is precipitation outside or due to friction in transport.


So, criterion for choosing a sheepskin coat No. 1 is quality, documented.
By the way, when you are given a certificate, check them with what is noted on the product label. Some merchants manage to slip an inexperienced buyer a document that does not correspond to the product in question. Roughly speaking, they are trying to “slip” him a low-quality product.

Criterion 6. “Test” with moisture

When you go to buy a sheepskin coat, don’t forget to take white wet wipes with you. Oh, how useful they are! With their help, you can check the surface of the product for the quality of painting. Just run a napkin over it. It will instantly absorb paint residue if the item was painted incorrectly. Imagine now if you get caught in the rain or sleet wearing this sheepskin coat! It will become ugly after the first exposure to precipitation. In addition, there is a risk of the paint damaging the items worn underneath it.

The water-repellent effect of a sheepskin coat can be checked with a simple test: drop a drop of water on it. If it drains from the skin and leaves no trace behind, then you can be congratulated - it’s a quality item.

Selection criterion 7. “Test” by sniffing

And lastly, another way to check the quality of a sheepskin coat is to smell it. The smell should be pleasant, “furry,” but not reek of chemicals. It would be a shame if you flaunted yourself in beautiful clothes that reeked of the “smells” of a homeless person. And this is exactly how a thing made of leather that has been tanned incorrectly “smells”. The smell will be especially noticeable in wet weather. If you can put up with this, then wait until it weathers or buy a special impregnation for sheepskin coats.

Caring for a sheepskin coat

The deal is completed, and you are the happy owner of a luxurious sheepskin coat. But it’s not enough to admire it - it requires appropriate care.

  1. Do not wear a suede sheepskin coat in rainy weather;
  2. If you do find yourself in a long sheepskin coat in the rain, do not sit in it in public transport or in a car - you risk pulling it out on your butt;
  3. Do not wear a bag on the shoulder or on the elbow of a sheepskin coat - a friction mark will remain;
  4. At home, a thing made of tanned fur should hang on hangers, and in the closet - suede does not like bright light: neither solar nor artificial;
  5. In the closet, hang it so that it hangs separately and does not touch other clothes;
  6. Do not spray perfume on your sheepskin coat - the aroma of even your favorite perfume on the fur will eventually become disgusting, having nothing in common with the original;
  7. Regularly saturate the surface of the sheepskin coat with a water-repellent agent - this will keep the top layer from moisture;
  8. Regularly iron your sheepskin coat with a rubber brush;
  9. If grease has formed on the collar, cuffs or pockets, remove it with a mixture of ammonia and tooth powder, brushing with a natural bristle brush;
  10. Using regular semolina, you can remove greasy stains from a sheepskin coat. If it didn’t work in one go, repeat the steps - pour cereal onto the dirty area and rub it in lightly, then shake and evaluate your work.

The correct choice of a high-quality sheepskin coat and careful care of it will help preserve the decent appearance of the item for a long time. And you will flaunt it for many more seasons, without fear of the harsh winter!

Rating: 3

The fur coat is electrocuted: what to do?

Sometimes it happens that even if all the necessary conditions are met, the product still shoots with charges. Why this happens is quite difficult to explain.

However, what to do in such a situation with your favorite mink coat is known - you need to treat it with an antistatic agent for clothing. It will help relieve the electrical charge for a while.

It can be applied in several ways:

The antistatic agent is sold in the form of a spray can. It is usually colorless, so it will be difficult to spoil anything with it. However, not everyone decides to use it directly on fur, so you can treat the lining of the fur coat. It is usually made of a synthetic material that highly electrifies things. An antistatic agent will relieve accumulated tension. Then you can wear it with any things.

You can also use an antistatic agent to treat synthetic items that are worn under a fur coat. However, then there is also a danger of damaging things, and with other sweaters the fur coat can still give an electric shock.

A question for owners of sheepskin coats and simply knowledgeable people. I bought a sheepskin coat a month ago. And now it's time to put it on. I'm in shock now. 14 days have passed, you can’t bring her back. but the problem is this: no matter what dress or skirt I’m wearing, they all rise up to the waist in this sheepskin coat and are twisted at the waist! Before you take it off, you have to undo the bottom buttons, straighten the dress, and only then take it off! The same thing happens with sleeves - after an hour in a sheepskin coat, a long sleeve of clothing rises, twists and turns into the size of a T-shirt sleeve! At first I thought that, perhaps due to inexperience, I bought a sheepskin coat that was the wrong size. but 1.5 of my arms can fit into the sleeve! and it sits quite loosely in the hips! Plus, when it is completely unbuttoned, the hem also rises when moving! Please advise what to do! I'm just confused. The sheepskin coat is not cheap, I like it. What could be causing this problem? Can this be fixed? I used to wear fur coats and fur coats - they have a smooth lining and, of course, this never happened!

Woman.ru experts

Find out the opinion of an expert on your topic

Kuzmin Ivan Ivanovich

Psychotherapist, Supervisor. Specialist from the site b17.ru

Antakova Lyubov Nikolaevna

Psychologist, Consultant. Specialist from the site b17.ru

Olga Matvienko

Psychologist, Art therapist. Specialist from the site b17.ru

Baranova Yulia Germanovna

Psychologist, Consultant. Specialist from the site b17.ru

Tropina Natalya Vladimirovna

Psychotherapist. Specialist from the site b17.ru

Svetlana Kazakova

Psychologist. Specialist from the site b17.ru

Victoria Kiseleva

Psychologist, Gestalt therapist. Specialist from the site b17.ru

Sokurenko Anna

Psychologist, Consultant. Specialist from the site b17.ru

Spiridonova Nadezhda Viktorovna

Psychologist. Specialist from the site b17.ru

How to choose the warmest one

Girls often choose outerwear only based on their quality. At the same time, they do not pay attention to the possibility of wearing them in winter, since not all products are suitable for this. If you want to choose warm clothes, you need to know exactly how unscrupulous manufacturers insulate sheepskin coats. It is recommended to read the advice of experts and find out which sheepskin coat to choose for the winter:

  • You should not stop at foreign European manufacturers. Their cut and design are quite interesting, but the skin used for sewing is not intended for frosts in Russia.
  • Russian-made products are heavier, and the material used is practically not subject to additional processing. This prevents the leather from becoming more flexible, but makes the item warmer.
  • Warm sheepskin coats are long models with fur on the collar. In this case, it is better to give preference to a Turkish manufacturer who uses sheep skins for tailoring. Such fur will provide better warmth in winter.

Russian manufacturers can also insulate sheepskin coats, but they do it a little ineptly. In addition, Turkish models are more attractive, although their cost is much higher.

How to wear a natural fur coat correctly

To prevent the product from causing electric shock, you must follow a few simple rules:

  • wear natural fabrics;
  • avoid any friction.

Antistatic for clothes

Regardless of whether the coat is mink or mouton, it is advisable to avoid wearing artificial synthetic fabrics with it. They electrify the product very strongly, so the current charges are stronger and more frequent. However, it is not necessary to dress entirely in cotton or wool. You can limit yourself to a jacket made of natural fabric.

Trousers or jeans come into less contact with the lint of the fur coat, so they can be left on. You should also give preference to natural scarves and gloves, otherwise they will cause electric shock if they come into contact.

It is advisable to minimize any possible friction. This can be either the friction of a fur coat against another surface, or its different elements against each other. Otherwise, no natural fabrics will be able to correct the situation. Therefore, it is advisable not to lean against any surfaces in public transport or in other places.

It is also necessary to ensure that when walking the sleeves and arms do not rub against the fur coat. In the wardrobe you need to separate it from other things if possible. For example, hang it in a closet where it will not come into contact with them. All this will reduce the amount of accumulated current between the hairs.

How to make sure the quality

It is very difficult to purchase a high-quality outerwear today, but it is possible if you know all the criteria for choosing. The following points are highlighted on how to determine the high quality of a sheepskin coat:

  • The top material of the item is called fur velor, which should have a uniform pile of the same length.
  • The outer surface should be free of scratches, salt stains and other defects. There should be no internal lint visible at the bottom of the product.
  • If there is a water-repellent film, clothing should be uniform in shade and structure.
  • The high quality of a sheepskin coat should be determined by its seams, which should not have gaps or other flaws. Often these seams are double stitched, which indicates the quality of the down jacket.
  • The product is sniffed and crushed to identify unpleasant synthetic odors and detect kinks.
  • Every expensive item must be accompanied by a quality certificate when sold. This indicates the integrity of the manufacturer.

The quality of the product is primarily determined by the materials from which the sheepskin coats are made. There are models that use a lot of fur. As a result, the product looks more like a fur coat. The quality of the fur in this case is checked by molting. To do this, you need to pull a piece of wool (if hairs remain in your hands, then such material will shed during wear, it is better to refuse to purchase this clothing).

How to choose a sheepskin coat according to your figure?

To highlight the advantages of the figure and hide the flaws. To do this correctly, you should consider these general recommendations:

  • Young ladies with outstanding shapes are recommended to choose flared models of sheepskin coats that are knee-length or even lower. Short jackets will look bad on them.
  • Girls with narrow breasts but curvy hips should pay attention to models with a cape, as well as products with a richly decorated top. Products with a transformable collar are also suitable for them. You should only avoid models with patch pockets.
  • For women with an apple figure, straight-cut products without an emphasis on the waist are suitable (in this case, choosing models with wide overlay belts is not advisable).
  • Girls with an hourglass figure can afford any variety of fashionable sheepskin coats. Products of the “robe” cut are most suitable for them.
  • Slender young ladies with a rectangular figure are recommended to pay special attention to leather sheepskin coats with prints and fancy trim on the top. Semi-fitted silhouettes suit them.

You need to be careful when choosing the size that suits you. To do this, when trying on things, you will need to turn in different directions - if the product does not hinder your movements, then it is chosen correctly. Also, during fitting, it is recommended to raise one arm up - for a model chosen correctly, the second shoulder should remain in its place.

If you are trying on a sheepskin coat over a turtleneck or T-shirt, choose a product one size larger than required. Remember that in winter you will want to wear a thick sweater or bulky jacket under such things. If you take a tight-fitting sheepskin coat, you are unlikely to succeed.

Careful inspection of the sheepskin coat

Having decided on the material, you should carefully examine the item inside and out.

What you need to pay attention to from the outside:

  • The suede surface should be smooth, pleasant to the touch, not rough. It is important to inspect every area of ​​the product. Don’t just glance, but carefully examine the back, front, sleeves, armpits, etc.;
  • see if there are any glue stains, paint smudges or other blemishes on the clothes;
  • the pile over the entire surface should be uniform, without bald spots or excessively fluffy areas;
  • there should be no kinks, folds or scratches. Such phenomena indicate low quality of the material;
  • good suede has water-repellent properties. As an experiment, you can suggest the seller sprinkle the surface with water. In the case of a high-quality sheepskin coat, drops of water will roll off without being absorbed. A seller who is confident in the quality of the item will not interfere with such verification, and in case of refusal, one should doubt his honesty;
  • the entire surface of the sheepskin coat should be monochromatic, provided that the decor does not include a combination of elements of different colors. Transitions of shades on a solid canvas should raise suspicions about the quality of the item;
  • The quality of coloring should also be checked. To do this, blot the suede in an inconspicuous area with a damp cloth. The paint should not remain on the napkin.

    The surface of the sheepskin coat should be flat and smooth

Advice. You can check the quality of the material by squeezing a section of the product in your palm. If it immediately smoothes out, the processing technology has been followed.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
Для любых предложений по сайту: [email protected]